Thanks to their cubic shapes, our rotating nuts can unite and multiply almost infinitely. Dressed in your favourite colours, the lifts of the multiple Masterbox range are a magnificent and unusual interior decoration element.
- 3 years of international guarantee
- Hand made in Switzerland
- Works with 2 batteries and on sector
- Included watch support
Technology and Design by appointment. Direct mechanical training as well as the electronic card with a specified number of rotations/day have been developed and tested with modern and innovative technologies that give it a high reliability of operation and a long life span. Low consumption, 2 standard 1.5 volt battery power, 3 year autonomy. See our presentation video at the bottom of the page ...
OPTION: 2 individual facades in removable acrylic glass, mounted on hinge (click option is +160 €).
- Garanti for a period of 3 years
- Programmable as desired
- Ready for use: Piles LR14 OFFERINGS
- Dimension: 30x20x10cm
- Material: boitier Bois
- Optional: protection glass in promotion
Rotation programs
The original SWISS KUBIK setting is programmed to reproduce the natural movements, for a cycle of 950 rotations/day in each direction of rotation, which corresponds to the requirements of almost all the automatic moving watches currently available on the market. At the start, a light indicator lights up in the switch, alternately in red and green for a few seconds to indicate the initialization phase.
The initial program, suitable for all automatic market watches, runs 95 cycles of 20 alternating rotations every 24 hours. Between each rotation cycle, the watch support stops automatically in its initial vertical position.
However, it is easy to modify these parameters in a few seconds, since this reassembly is programmable using the free interface program, downloading on this page.
High-end technology
In STANDARD adjustment, the correct operation of your rotating nut is indicated by a light green light (or red according to the state of the batteries) flashing at a regular interval of a pulse every 5 seconds.
In case of setting in PERSONALIZED mode of your rotary clipping using the interface program, the light green light (or red depending on the state of the stacks) will flash at a regular interval of two pulses close every 5 seconds.
A malfunction of the tower counting system shall be indicated by a flashing red light on a regular interval of three pulses closer together every 5 seconds.
In case of low load of the batteries, the light light will blink red in accordance with the mode of operation adopted. The batteries must then be replaced within 3 months
